
Short answer: Google's Ads Help page on how Performance Max works alongside your other campaigns now says that Performance Max “may also filter out navigational or brand-specific search queries to prioritize serving them through dedicated Search campaigns.” In plain terms, when someone searches for your business by name, Google may leave that search to a regular Search campaign and not serve your Performance Max ads on it. If you do not have a funded brand Search campaign, you could be giving up some of your easiest leads without noticing. The fix is small: find out whether you have that campaign, and whether it can actually run.
This matters most for businesses that handed their Google Ads account to one big automated campaign and never looked back. A heating and cooling company, a dental office, a lawn care outfit or a restaurant group in Northeast Indiana can run Performance Max for a year, see a decent cost per lead, and never learn how much of that result came from people who already knew the company name and typed it into Google. Those searches are often among the cheapest conversions in an account. If the system quietly stops serving them from the campaign you were watching, the numbers can shift without anyone touching a setting.
A note on what this post is. We have not seen a change in a client account, we did not test the behavior, and Google has not published an announcement or a date. Everything below comes from the Google help pages and trade reports listed at the end. Where Google's own page leaves a question open, we say so. We also sell Google Ads management, so weigh our advice with that in mind.
Key Takeaways
- Search Engine Roundtable reported on November 2, 2026 that Google added a paragraph to its Performance Max help page saying the campaign type may filter out navigational and brand-specific searches in favor of dedicated Search campaigns. The change was first spotted by Hana Kobzová and reported by PPC News Feed.
- Google's wording is “may,” not “will.” The page gives no date, no setting to control it, no report showing which queries were filtered and no definition of a “brand” query, according to ppc.land.
- Google tells advertisers to make sure brand Search campaigns have “sufficient budget and high-quality, eligible ads,” and to consider adding Search Themes to Performance Max.
- Google separately offers brand exclusions for Performance Max, which block your ads on searches for your brand name, misspellings and subsidiary brands across Search and Shopping.
- When we loaded the help page ourselves on November 15, the copy we received listed only the older Search keyword exception and did not show the new brand sentence. We cannot say whether that is a caching difference, a regional version or a rollback.
What Did Google Change About Performance Max and Brand Searches?
Search Engine Roundtable wrote on November 2, 2026 that Google Ads “updated its How Performance Max interacts with other campaigns in your account help document” to add a new section. The new paragraph, which the article says was not in the archived June 2026 version of the page, reads in full:
Performance Max campaigns may also filter out navigational or brand-specific search queries to prioritize serving them through dedicated Search campaigns. This ensures brand-related queries are handled by campaigns offering more precise control. To capture this traffic, ensure your dedicated brand Search campaigns have sufficient budget and high-quality, eligible ads, and consider adding Search Themes to the Performance Max campaign.
Search Engine Roundtable credited Hana Kobzová with spotting the change and posting about it on PPC News Feed. PPC News Feed's own short write-up says the same thing in its own words: Performance Max campaigns may filter out navigational and brand-specific searches in favor of dedicated brand Search campaigns.
The trade site ppc.land read the page more closely. It noted that the help page carries no date or change note, and that neither the page nor the PPC News Feed report points to a Google announcement. Its conclusion: when the sentence first went live, and whether the system behavior changed at the same moment as the text, “is therefore not established.” We agree, and we would add that a help-page edit is a statement about how Google says the system works, not a measurement of what it is doing in your account today.
On November 9, Brandon Mangan's weekly Google Ads change digest listed it as one of the notable items of the week, with a plain instruction: make sure your brand Search campaigns have enough budget and eligible ads to catch the traffic, because Performance Max may stop covering it, and if you do want Performance Max on brand terms, add Search Themes. That is a summary of Google's advice, and it still leaves the open questions below.
What the Page Says, in One Place
- What: Performance Max may filter out navigational or brand-specific searches.
- Why, according to Google: to let dedicated Search campaigns handle them with “more precise control.”
- What Google asks of you: give brand Search campaigns enough budget and good, eligible ads, and consider Search Themes.
- What the page does not say: when it started, how often it applies, how to turn it off, how Google defines a brand query, or what happens if you have no brand Search campaign.
Why Does a Search for Your Business Name Matter So Much?
A brand search, sometimes called a navigational search, is someone typing your company name, or a close variation, into Google. They are not browsing. They are trying to get to you, often because a neighbor recommended you, they saw your truck on the highway, or they met you at an event and want to call. Those people often behave very differently from someone searching “furnace repair” at 2 a.m. who has never heard of you.

Google's own help page on brand exclusions describes the situation from the other side. It says brand exclusions let you strategically manage “brand traffic” and “avoid paying for clicks from users who are already navigating to your site.” In other words, Google itself treats brand clicks as a different animal from the rest of your ad traffic, and an expensive one to pay for twice.
That is why there are two schools of thought, and both are reasonable.
- Pay for your brand clicks. You protect your name from competitors who bid on it, you control the headline and landing page, and you get a clear report on that traffic. It is a small, steady cost for a hard-to-lose customer.
- Do not pay for what you would get free. If your organic listing and Business Profile already sit at the top for your name and nobody else bids on it, paid clicks on your brand may just be a toll on people who were coming anyway.
We wrote about that trade-off in detail in our branded search playbook for PPC and SEO. The new help-page text does not settle the question. It changes who decides: you, through a campaign you build on purpose, or the system, through a filter you cannot see.
One data point on the stakes, with a caveat. ppc.land's write-up cites a 2024 analysis from the measurement firm Haus, discussed in an April 2026 debate about Performance Max at scale. As ppc.land summarizes it, excluding brand terms lowered customer acquisition costs in every experiment tested, by an average of 40%, but the incrementality picture was mixed: where exclusion was the better strategy it produced 24% more incremental revenue, while in half of the tests, including brand terms produced more incremental revenue. We did not read the Haus study itself, and those tests mostly involved larger advertisers than a typical Allen County shop. The takeaway is that brand traffic can make a blended account look better than it is, and either choice can be right depending on the business.
How Does Google Decide Which Campaign Serves a Search?
Before the new paragraph, the same help page already described the general rule. When Performance Max and another campaign in the same account could serve for the same impression, Google Ads prioritizes the campaign with the highest Ad Rank. Google says this exists so campaigns from the same advertiser do not compete against each other and drive up bids.
There is one older exception for Search campaigns, and it is the part that is easy to miss. A Search campaign with a keyword that exactly matches, or is a spell-corrected version of, a person's query is preferred over Performance Max. Google's own example is a search for “plumbrs”: if your account has the exact match keyword [plumbers] and the broad match keyword plumbrs, the exact match keyword is preferred. If no keyword in the account exactly matches the query, the higher Ad Rank wins.
That old exception depends entirely on what you built. If you have an exact match keyword for your business name in a Search campaign, that campaign gets the brand search. If you do not, Performance Max can win it on Ad Rank. ppc.land's reading of the new paragraph is that it adds a second route that does not depend on your keywords at all: Performance Max may step back from a query because of the kind of query it is, not because you built a matching keyword somewhere else.
The Two Rules, Side by Side
- Older rule (keyword-based): an exact match, or spell-corrected, keyword in a Search campaign beats Performance Max for that query. No keyword, no guarantee.
- New text (query-based): Performance Max may step aside for brand or navigational queries, so dedicated Search campaigns can serve them. You do not have to have a matching keyword for the filter to apply, though Google does not say exactly when it does.
Our earlier post on Google's new channel priorities and budget caps covers a related theme: Google adding controls that decide where your money goes, and many owners finding out only by reading help pages. This is the same pattern on the query side.
What Could Change Inside Your Account?
It depends on how the account is built. These are our readings of Google's wording and ppc.land's analysis, not observed results. The practical effect, ppc.land wrote, depends on account structure, and we found that a useful way to sort accounts into three groups.
- You already run a brand Search campaign with a real budget. Google's new text describes the split you already have: brand demand in a campaign with keyword-level reporting and bid controls, Performance Max for everything else. Expect little change, except that your Performance Max numbers may look cleaner.
- You have Search campaigns, but no campaign aimed at your business name. Your brand searches may have been landing in a general Search campaign or in Performance Max. If Performance Max steps back, they could fall to a campaign not designed for them, with the wrong ad copy or landing page.
- Performance Max is your only campaign. This is the account most worth checking. Google's phrase “to capture this traffic, ensure your dedicated brand Search campaigns have sufficient budget” implies the traffic is not automatically served when that campaign is missing. ppc.land noted that the page does not say whether Performance Max keeps serving brand queries in that situation or whether those impressions simply go unserved by that advertiser.
Here is an illustration, and it is hypothetical, not a client result. Picture a heating and cooling company in Auburn that runs one Performance Max campaign set to count phone calls and form fills. Say the campaign reported 40 conversions last month, and 12 of them came from searches containing the company name. If those 12 move to a Search campaign that does not exist, they are not counted anywhere. Performance Max would report 28, the phone would ring a little less, and the owner would conclude the ads got worse. The reverse is also possible: 12 high-intent people might still find the company through the organic listing, and the ad account would simply stop taking credit for them. Without looking at the data, there is no way to know which story is true.
That uncertainty is the real risk. Either way, your Performance Max report stops being a clean measure of what your ads are doing, and you cannot tell why from the dashboard.
How Do You Check Your Account in One Hour?
These steps are our suggestions based on Google's help pages, not an official Google procedure. You need view access to the Google Ads account. If an agency or a former employee runs it, ask them for these answers in writing.
- List your active campaigns. Note the campaign type of each one: Performance Max, Search, Demand Gen, Local Services. Write down whether any campaign is built around your business name.
- Look for a brand Search campaign. It will usually have your company name in the campaign name and keywords that are your name and its common misspellings. If you do not find one, the account probably has no dedicated brand campaign.
- Check that it can run. Google's page says brand campaigns need “sufficient budget and high-quality, eligible ads.” Look for a status like Limited by budget, Ads disapproved or Not eligible, and fix any you find.
- Check for brand exclusions on Performance Max. If someone applied a brand exclusion to the Performance Max campaign earlier, Performance Max already stays off your brand terms, and the Search campaign is the only way you serve on them. Make sure that campaign is healthy.
- Export a baseline. Pull the last 90 days of conversions by campaign and save them. Add the date you did it. If your Performance Max numbers shift in December, you will have something to compare against.
- Search your business name yourself. On a phone, signed out, note whether you see a paid ad, where your organic listing and Business Profile appear, and who else shows up above you.
- Write down what you found and when. If your results move after this, you will know whether it was your account or the filter.

If you are comfortable in Google Ads, the whole thing takes less than an hour. If you are not, it is the sort of review an owner can hand to someone who is, with the list above as the brief. Our related posts on negative keywords for service businesses and on what Google's search query reports can and cannot tell you cover the neighboring checks.
What Should a Small Brand Search Campaign Look Like?
If your audit finds no brand campaign and you decide you want one, the good news is that it is the simplest campaign in most accounts. These are our general practices, not rules from Google.
- Keep it small. A handful of keywords: your business name, the common misspellings people actually make, and your name plus a service, such as your company name and “estimate.”
- Write ads that sound like you. Your name in the headline, your phone number, your service area and a real reason to call. Brand clicks are not strangers, so you do not need a hard sell.
- Point it at the right page. Send brand clicks to a page that loads quickly on a phone and has the phone number at the top. The best landing page for a name search is often your homepage or a contact page, not a service page.
- Give it a budget it will not run out of. Brand clicks are often cheaper than non-brand clicks, so a small daily amount may cover the whole month, though your own account will tell you. Check the status each week for the first month so the budget does not quietly limit it.
- Protect your name. Look at the Auction Insights report for your brand campaign. It shows other advertisers bidding on your terms, which is useful evidence for whether paying for your own name is worth it. Auction Insights is incomplete, so also check by hand.
- Make sure the conversion tracking matches. If the brand campaign counts calls and forms the same way Performance Max does, your reports will line up. If it counts something different, your totals will not add up.
A word on the other direction. If you run Local Services Ads, those work on a different system, and we covered how they sit next to Performance Max in our Fort Wayne guide to Local Services Ads and Performance Max. Nothing we read says the brand filter changes how Local Services Ads work.
Should You Use Brand Exclusions or Search Themes?
Google already offers a control that does something close to what the new paragraph describes, and it has documentation. Google's help page on brand exclusions says they are “the most effective way to control how your ads appear on searches for your brand,” and a more comprehensive option than negative keywords, because they automatically block your ads on searches for your brand name, common misspellings and related subsidiary brands. In Performance Max, brand exclusions apply to both Search and Shopping ads, and you can allow Shopping ads to keep serving for the excluded terms. Google's usage recommendation is to use them to keep Performance Max off specific brand searches, such as your own or a competitor's, when you manage brand traffic in a separate campaign and do not want to pay for those clicks.

Google's page on brand settings adds some details worth knowing:
- How a “brand” is defined. A product or service that has at least one of a logo, a trademark, a domain name, a dominant product name, or a business name “which may constitute a brand for small and medium-sized businesses.” So a local business can count as a brand in Google's catalog, though we found nothing saying the new Performance Max filter uses the same list.
- No extra cost, but less reach. Google says there is no additional cost to apply brand lists, but “brand settings limit the reach of a campaign and performance may decrease.” Google recommends using them only for campaigns that really need them.
- Exclusions win ties. If a campaign has both brand exclusions and inclusions, the page says brand exclusions are prioritized.
That gives you a clear choice. If you want brand searches handled in a Search campaign, a brand exclusion on Performance Max is the documented way to make sure Performance Max stays out of the way. If you want Performance Max to compete for brand searches, Google's page suggests Search Themes, but, as noted, it does not explain how that works against a filter.
ppc.land spelled out the puzzle. Search themes are signals, not keywords. When Google doubled the limit to 50 per asset group in May 2025, they were described as being prioritized much like phrase or broad match keywords, adding to the queries Performance Max can reach. If a theme that is a brand name is identical to a user's query, does it keep the query inside Performance Max, or does the brand filter override it? Google's page is silent. A plausible reading, ppc.land wrote, is that the advice is about the non-brand demand Performance Max keeps, but Google does not say so, and it joins both recommendations in a single sentence.
Our view, offered as judgment and not as a rule: for most small local advertisers, the cleaner setup is a small, well-funded brand Search campaign you control, with Performance Max kept for finding new customers. It is easier to read, easier to cap and easier to explain to the owner. We would not rely on search themes alone to hold brand traffic until Google explains the behavior.
If you handle everything through AI-driven settings, also read our post on the AI Max upgrade that already changed many accounts. Google put branded search controls inside AI Max in May, according to ppc.land, so brand handling is now scattered across several campaign types.
How Will Your Reports Look Different?
Nothing we read describes a report that shows which queries Performance Max filtered. ppc.land noted that the page mentions no report or label for filtered queries and gives no figures on how many are affected. So the way to see it is indirect.
- Compare by campaign, then in total. If Performance Max conversions fall and the brand Search campaign's rise by a similar amount, the work moved. If total conversions fall, something else happened.
- Check your brand Search campaign's impressions. A sudden climb is the clearest signal that brand queries are landing there now. Google calls for sufficient budget, so look at impression share lost to budget too.
- Look at calls and forms by source, not just by campaign. Your phone system or CRM tells you whether the total number of leads changed, which is the number that pays the bills.
- Mind the calendar. The November core update began on November 10, Black Friday is close and holiday hours change how people search. We covered the timing in our post on the core update landing before Black Friday. A drop in December can have more than one innocent explanation, so change one thing at a time.
There is a measurement lesson here beyond brand searches. When one automated campaign type takes credit for demand it did not create, it can flatter itself. A tidier account, with brand traffic in its own campaign, makes the Performance Max number closer to what it really earns from new customers. That is uncomfortable if the old number was pleasant, but you will make better budget decisions with the honest one.
What Do We Still Not Know?
A lot, and it is better to be plain about it than to guess.
- Whether the live page matches the reports. When we loaded Google's help page on November 15, 2026, both through a reader tool and by fetching the raw page, the text we received contained only the older Search keyword exception and not the new brand paragraph. That could be caching, a regional or language variant, or an edit. Three outlets quoted the sentence, and Search Engine Roundtable compared it with an archived version, so we believe it was there. We cannot say whether it still is.
- When it began. The page has no date or change note, according to ppc.land. Neither Google nor the sources say when the behavior started, or whether the system changed at the same moment as the text.
- How Google defines a brand query. The page does not say whether “brand” means your own brand, a competitor's or any name Google recognizes. For a retailer, a search for a manufacturer's name is often a product search, and ppc.land asked whether Shopping inventory is covered. We do not know.
- What happens with no brand campaign. The page implies the traffic is not automatically served, but does not say so.
- How to switch it off. No setting is described. The documented control is the brand exclusion, which works the other way around.
- How much it matters. There is no data from Google on how often Performance Max steps aside. We did not test it on a live account.
So the advice is modest. Look at your account this week, save a baseline, make sure a brand Search campaign exists if you want your name covered, and let the numbers tell you what happened. If Google later confirms or reverses the wording, you will already know where you stand.
Want Someone to Check Who Is Serving Your Brand Searches?
Button Block reviews Google Ads accounts for Northeast Indiana businesses. We can look at your campaign structure, confirm whether your business name is covered, check budgets and ad status, and save a baseline so you can see what changes. We sell these services, so weigh our advice with that in mind.
Frequently Asked Questions
- Will Performance Max stop showing my ads when people search my business name?
- It might, and Google has not said how often. Google's help page says Performance Max may filter out navigational or brand-specific search queries so that dedicated Search campaigns can serve them. The wording is may, not will, and the page gives no date, no setting and no numbers. If you already run a funded brand Search campaign, you are covered either way. If you do not, check your account this week.
- Do I need a separate brand Search campaign now?
- If you want your ads on searches for your own business name, Google's page points you toward one: it says to make sure dedicated brand Search campaigns have sufficient budget and high-quality, eligible ads. Whether that is worth paying for depends on your market. A business with competitors bidding on its name usually has a reason to. A business nobody else bids on may get those clicks for free from its organic listing. Test it rather than assume.
- What is the difference between a brand exclusion and a negative keyword?
- Google's help page says brand exclusions are more comprehensive than negative keywords because they automatically block your ads on searches for your brand name, common misspellings and related subsidiary brands. In Performance Max, brand exclusions apply to both Search and Shopping ads. A negative keyword only blocks the words you type in, so you have to list every variation yourself.
- Are search themes the fix Google is recommending?
- Google's sentence says to consider adding Search Themes to the Performance Max campaign, but it does not explain how that helps capture brand traffic that Performance Max may filter out. ppc.land pointed out that search themes are signals that add to the queries Performance Max can reach, and that Google's page is silent on whether a theme containing a brand name overrides the filter. Treat it as something to test, not a guaranteed fix.
- Will my Performance Max results look worse?
- They could, in one specific way. Searches for a business name usually come from people who already know the company, and those searches tend to convert well. If Performance Max hands them to a Search campaign, the conversions move to that campaign and the Performance Max report may show fewer. That would be a change in where credit lands, not necessarily in how many customers you get. Compare total conversions across all campaigns, not one campaign at a time.
- Does this affect Local Services Ads or my Google Business Profile?
- Nothing we read says so. The help page change concerns how Performance Max and Search campaigns share queries inside a Google Ads account. Local Services Ads and Business Profile listings run on separate systems, and none of the sources we read connect them to this change. Your Business Profile can still appear when someone searches your name.
Sources & Further Reading
- Search Engine Roundtable, “Google Ads PMax Campaigns May Filter Out Navigational & Brand Queries” (November 2, 2026): seroundtable.com (read November 15, 2026): the full text of the new paragraph, the comparison with the archived June 2026 version and the credit to Hana Kobzová.
- ppc.land, “Google's Performance Max may stop serving brand searches”: ppc.land (read November 15, 2026): the detailed reading of the page, what it does not say, the search themes puzzle, and the summary of the Haus analysis. We read most of the article, not every section.
- PPC News Feed, “Google Updates How Performance Max Handles Brand Searches” (November 2026): ppcnewsfeed.com (read November 15, 2026): the original sighting report, short.
- Google Ads Help, “How Performance Max interacts with other campaigns in your account”: support.google.com (read November 15, 2026): the Ad Rank rule and the Search keyword exception with the “plumbrs” example. The copy we received did not show the new brand paragraph, as explained in the post.
- Google Ads Help, “About brand exclusions”: support.google.com (read November 15, 2026): what brand exclusions block, the Search and Shopping scope in Performance Max, and Google's usage recommendation.
- Google Ads Help, “About brand settings for Search and Performance Max”: support.google.com (read November 15, 2026): how Google defines a brand, the no-extra-cost and reduced-reach notes, and exclusions taking priority over inclusions.
- Brandon Mangan, “Google Ads changes, Nov 2 to 8” (November 9, 2026): buttondown.com (read November 15, 2026): a weekly digest that listed the Performance Max brand filter among the week's changes. A secondary summary of Google's advice.
